01
Measure.
Capture a reference head. Resolve the shape and fit.

04 / THE MAKING
04 / THE IDEA
One piece of steel. The right craftspeople. A first prototype to take to the course.


THE FIRST PROTOTYPE
The preferred path: machine the head and neck from one piece of stainless steel.
01
Capture a reference head. Resolve the shape and fit.
02
Machine one head. Approve the silver stonewash.
03
Fit the shaft and cover. Let the rounds prove the idea.
1999 NEWPORT 2 REFERENCE / VISUAL MASTER 06
PGA TOUR reported these playing specifications for Tiger’s famous Newport 2 in April 2020. They describe his club at that time, not a complete 1999 factory drawing.
| Measurement | Reported reference |
|---|---|
| Finished length, with grip | 35.25 in |
| Lie | 70° |
| Loft | 3.75° |
| Head mass | 327 g |
Nominal body: 114.3 × 29.5 × 22.7 mm. These are working dimensions, not verified measurements of Tiger’s putter. The outline, cavity, shoulders and continuous neck sweep were revised against the approved front and rear reference images and the annotated video review. The photos were taken in 2023, not when the putter was new in 1999.
The 114.3 mm scale is a working assumption, based on a Titleist staff description of a generic Newport 2 as approximately 4.5 inches long. It does not verify the dimensions of Tiger’s custom head. Perspective and hidden surfaces remain uncertain.
Calculated head mass: approximately 316 g at an assumed stainless density of 8.0 g/cm³, against the reported 327 g reference. That difference remains unresolved. The model has not been forced to an exact weight.
The reference photographs · The nominal scale reference
Before machining, measure or scan an appropriate physical reference and settle the cavity, offset, sole planes, radii, bore and tolerances. Proposed material: 303 stainless. The original is described as GSS; we are not claiming material equivalence.
Download the visual masterLight stonewash on the body and integrated neck. A precise, flat striking face with shallow machining. Soft silver, gently mottled, without deep hammer marks.
The CRKT Pilar III D2, SKU 5317D2, is the visual finish reference. Its listed finish is Stonewash. Approve matching-metal samples before the head: tone, texture, edge rounding and dimensional change all matter.
The finish referenceThe model is a single closed solid for proportion review, not production CAD. Original maker’s stamps and red-dot bores are omitted. The interactive viewer uses the approved revision 6 geometry. The photo concepts are retouched stainless-putter and leather-cover references, not exact renders of this model. The model’s dimensions still need physical verification. Stainless will collect scratches and polished wear, rather than the warm oxidation of an oil-can carbon-steel finish.
THE ALTERNATIVE ROUTE
A quicker first prototype, with a shape already chosen. Two options to explore.
01 / SANITAS
303 stainless option. One-piece milled blank with a plumber neck.
~340 g · .355 in interface
$140 listed
02 / TRUBLU
303 stainless. Raw, brushed or satin bead-blasted options.
~350 g · .370 in interface
70° lie · 3° loft · $299 listed
Supplier listings reviewed November 15, 2026. Confirm price, stock and dimensions. Neither is an exact 1999 Newport 2 reproduction; the shaft interfaces differ. Head prices exclude the rest of the build.

FOR LUCAS & LEVI
NEXT CHAPTER / 01
